Viewing Alert Notifications - Hitachi VSP G200 System Administration Manual

Viewing alert notifications

You can view alert email messages, alert Syslog messages, and alert SNMP
trap messages in the Device Manager - Storage Navigator Alerts tab and the
Alert Detail window.
Before you begin
You must have the Storage Administrator (View Only) or Storage
Administrator (Initial Configuration) role to perform this task.
• Email: Check your email to view alerts sent by email. Alerts that are
• Syslog: Check the messages on the Syslog server to view alert information
• SNMP traps: To view SNMP trap information, use the SNMP Manager in
Configuring alert notifications
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
246
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
reported through email are the same as the SIM information that is
displayed in the Alert window or reported through an SNMP trap.
sent there.
Device Manager - Storage Navigator. See the Hitachi SNMP Agent User
Guide for information about using SNMP traps.
In the maintenance utility, click the SNMP tab to display it.
In SNMP Agent, click Enable to use the agent or Disable not to use it.
Select the Email tab. The Email window displays the current settings for
the Mail Server, SMTP Authentication, an Email Address.
To send a test email message, click Send Test Email. A completion
notice displays.
Click OK to acknowledge the notice and close the message.
Click the Syslog tab. The Syslog window displays the current settings
for the Primary Server, IP address, and port number, and for the
secondary server IP address and port number.
To send a test message to the Syslog server, click Send Test message
to the Syslog Server. A completion notice displays.
Click OK to acknowledge the notice and close the message.
Click the SNMP tab. The SNMP window displays the current settings for
the Storage System Name, Contact, Location, SNMP Trap and SNMP
Manager.
To send a test SNMP trap, click Send Test SNMP Trap. A completion
notice displays.
Click OK to acknowledge the notice and close the message.
Alert notifications