License Key Expiration - Hitachi VSP G200 System Administration Manual

License key status
(example)
A term key or an
emergency key was
installed, but has expired.
Installed with the
permanent key or the term
key, but the licensed
capacity was insufficient.
Installed with the
permanent or term key,
and then LDEVs are added,
but the license capacity
was insufficient.
Installed with the
temporary key, and then
reinstalled with the
permanent key, but the
license capacity was
insufficient.
Installed with the
permanent or term key,
then reinstalled with the
emergency key.

License key expiration

If the license key for software-A expires, the license key for software-B is
also disabled if software-B requires an enabled software-A. In this scenario,
Installed (Disabled) is shown for software-B in the Status column of the
License Keys table. After that, when you re-enable software-A, software-B
is also re-enabled. If the Status column for software-B continues to display
Installed (Disabled), go to the License Keys table and manually change the
status of software-B back to Installed.
After your license key expires, no new configuration settings can be made,
and no monitoring functions can be used with Performance Monitor.
Configuration settings made before the expiration of the license key remain
in effect. You can cancel configuration changes for some software.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Status
Not installed blank
Not Enough License permanent or term
Grace Period permanent or term
Installed temporary
Installed emergency
Managing license keys
Key type Licensed capacity
Blank
Permitted and Used
Permitted and Used
Permitted and Used
Permitted and Used
Term (Days)
Blank
-
Number of
remaining days
before expiration
Number of
remaining days
before expiration
Number of
remaining days
before expiration
269