Changing Assigned Resource Groups - Hitachi VSP G200 System Administration Manual
Virtual storage platform gx00 and fx00
Hide thumbs
Also See for VSP G200:
- User manual (326 pages) ,
- User and reference manual (531 pages) ,
- System administrator manual (368 pages)
Table of Contents
Advertisement
7.
8.
Changing assigned resource groups
You can change the resource groups that are assigned to user groups by
using Hitachi Device Manager - Storage Navigator.
Before you begin
• You must have the Security Administrator (View & Modify) role to perform
• Create a resource group to be assigned to the user group in advance.
• You cannot change the resource groups of a user group that has All
• You cannot change resource groups of a built-in group.
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
Deleting a user group
You do not have to retain a user group for the life of the project. You can
delete it at any time by using Hitachi Device Manager - Storage Navigator.
Before you begin
• You must have the Security Administrator (View & Modify) role to perform
• You cannot delete a built-in user group.
• You cannot delete a user group if the users in it belong to only the user
166
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
In the Confirm window, check the settings and enter a task name in
Task Name.
Click Apply. The task is now registered. If the Go to tasks window for
status check box is checked, the Task window opens.
this task.
Resource Groups Assigned set to Yes
In the Device Manager - Storage Navigator Administration tree, select
User Groups.
On the User Groups tab, select a user group to change the resource
group.
Select the Resource Groups tab.
Click Edit Resource Group Assignment to open the Edit Resource
Group Assignment window.
In the Edit Resource Group Assignment window, change resource
groups to be assigned to the user group.
• Select the resource group to add, and click Add.
• Select the resource group to remove, and click Remove.
Click Finish.
In the Confirm window, check the settings and enter a task name in
Task Name.
Click Apply. The task is now registered. If the Go to tasks window for
status check box is checked, the Task window opens to display the
status of the task.
this task.
group to be deleted.
User administration
Advertisement
Table of Contents
