LdevInfo.csv
This CSV file contains information about logical devices (LDEVs). A record is
created for each LDEV.
For details of LDEVs, see the Provisioning Guide.
Item
ECC Group
LDEV#
LDEV Name
LDEV Emulation
LDEV Type
LDEV Attribute
Volume Size(Cyl)
Volume Size(MB)
Volume Size(Blocks)
CVS
Pool ID
RAID Concatenation#0
RAID Concatenation#1
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Table 40 Ldevinfo.csv file (Title: <<LDEV Status>>)
Number of parity group where the LDEV belongs.
Output example: X-Y (decimals)
•
If the number starts with "E" (for example, E1-1), the parity group contains
external volumes.
•
If "LDEV Type" is Dynamic Provisioning or Thin Image, a hyphen is output.
LDEV number
(00:00:00 to 00:3f:ff)
1
LDEV name
LDEV emulation type
LDEV type:
•
Basic
•
Dynamic Provisioning
•
External
•
Thin Image
•
ALU
LDEV Attribute:
•
CMDDEV (Command device)
1
•
CMDDEV
(Remote command device)
•
Journal (Journal volume)
•
Pool (Pool volume)
•
Quorum disk (used with global-active device)
•
ALU
•
SLU
•
Deduplication system data volume
•
Regular (Others)
LDEV capacity (in cylinders)
LDEV capacity (in MB)
LDEV capacity (in blocks)
Information about whether the LDEV is a custom-sized volume:
•
On: Custom-sized volume
•
Off: Others
Pool number. This is blank except for the following cases:
•
If "LDEV Type" is Dynamic Provisioning
•
If LDEV Attribute is Pool
Number of parity group to be concatenated to parity group (#0) identified by ECC
Group. Blank if the parity group is not concatenated to another parity group.
Number of parity group to be concatenated to parity group (#1) identified by ECC
Group. Blank if the parity group is not concatenated to another parity group.
Examples of storage configuration reports
Content
333