Hitachi VSP G200 System Administration Manual page 174

Before you begin
You must have Security Administrator (View & Modify) role to perform this
task.
Procedure
1.
2.
3.
4.
5.
6.
Editing resource groups
You can add resources to, remove resources from, and rename existing
resource groups.
Note the following restrictions for editing resource groups:
• Only resources allocated to meta_resource can be added to resource
• Resources removed from a resource group are returned to meta_resource.
• No resource can be added to or removed from meta_resource.
• The name of the meta_resource group cannot be changed or used for any
• Duplicate occurrences of the same name are not allowed.
• Resource group names can include alphanumeric characters, spaces, and
• Resource group names are case-sensitive.
• LDEVs with the same pool ID or journal ID cannot be added to multiple
• Host groups that belong to the initiator port cannot be added to a resource
174
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
In the Explorer pane, expand the Storage Systems tree, click the
Administration tab, and then select Resource Groups.
Click Create Resource Groups.
In the Create Resource Groups window, enter the name for the new
group, select the desired resources for the new group, and click Add to
add the new group to list of resource groups to be added.
Repeat the previous step for each new resource group to be added. If
you need to remove a group from the list of resource groups to be
added, select the group, and click Remove.
When you are finished configuring new resource groups in the Create
Resource Groups window, click Next.
Enter a task name or accept the default, and then click Submit.
If you select View task status, the Tasks & Alerts tab opens.
groups.
resource group other than the meta_resource group.
the following symbols: ! # $ % & ' ( ) + - . = @ [ ] ^ _ ` { } ~
resource groups or partially removed from a resource group. For example,
if two LDEVs belong to the same pool, you must allocate both to the same
resource group. You cannot allocate them separately.
You cannot partially remove LDEVs with the same pool ID or journal ID
from a resource group. If LDEV1 and LDEV2 belong to the same pool, you
cannot remove LDEV1 leave only LDEV2 in the resource group.
Use the sort function to sort the LDEVs by pool ID or journal ID. Then
select the IDs and add or remove them all at once.
group.
User administration