Item
Resource Group ID (Host
Group)
Resource Group Name (Host
Group)
T10 PI Mode
T10 PI
Asymmetric Access State
LunPortInfo.csv
This CSV file contains information about LU path definition. A record is
created for each port.
For details of LU path definition, see the Provisioning Guide.
Table 44 LunPortInfo.csv file (Title: <<LUN Port Information>>)
Item
Port
Security Switch
Port Address
Loop ID
Fabric
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
•
iSCSI:
○
10iSCSI2o (CHB)
○
10iSCSI2c (CHB)
•
NAS module:
○
NAS module (CHB)
Resource group ID of a host group (0 to 1,023, decimal)
Resource group name of a host group
Indicates whether the T10 PI mode can be applied to the port for which the LU path is
defined.
•
Enabled
•
Disabled
•
Blank if "Package Type" is not 16FC2 (CHB) or 32FC4R (CHB).
Information about the T10 PI attribute which is set for the LDEV number of the LU
path definition.
•
Enabled
•
Disabled
•
Blank if LDEV# is blank
Asymmetric access status (output only for an open system CHA that is Fibre or FCoE)
Indicates the asymmetric access status:
•
Active/Optimized: Prioritized
•
Active/Non-Optimized: Lower priority
Blank if "Package Type" is iSCSI
Port name.
The setting status of the security switch:
•
On
•
Off
•
Blank if "Package Type" is NAS module
Port address (2-digit hexadecimal number)
Blank if "Package Type" is iSCSI or NAS module
Port address (0 - 125, decimal)
Blank if "Package Type" is iSCSI or NAS module
One of the Fibre topology settings indicating the setting status of the Fabric switch:
•
On
•
Off
Examples of storage configuration reports
Description
Content
337