Adding Servers - Hitachi VSP G200 System Administration Manual

3.
4.
Result
A job is created to add the fabric switch.

Adding servers

Add servers so you can attach volumes. You can add multiple server
parameters from a file, or add one server at a time.
There are two methods of adding servers:
• Manually add information for one server at a time.
• Import a CSV (comma-separated values) file with information for one
Procedure
1.
2.
54
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Enter the following information from the configuration of the switch you
are adding:
• Virtual Fabric ID: For Cisco switches, the VSAN ID. Not applicable to
Brocade switches.
• Fabric Switch Type: Select Brocade or Cisco.
• Fabric Switch IP Address
To add or update a core switch, use the Management IP address of the
switch or the Active CP IP address.
• Port Number
• Username
• Password
Click Submit.
server in each row.
The CSV file must have the following headings, in the order specified:
Name, Description, IPAddress, OSType, WWNs (comma separated list of
WWNs). All fields are required except Description and IPAddress. Valid
OSType values are as follows:
• AIX
• HP_UX
• LINUX
• NETWARE
• OVMS
• SOLARIS
• TRU64
• VMWARE
• VMWARE_EX
• WIN
• WIN_EX
On the Storage Advisor dashboard, click Servers. Then click the plus
sign (+) to open the Add Server page.
On the Add Server page, do one of the following:
Preparing your management software