Configure Syslog And Snmp Notifications - Hitachi VSP G130 Installation Manual

Option
7. Click Apply.
8. When prompted that the initial settings are complete, click Close.
Next steps
(Optional) Configure syslog and SNMP notifications.

Configure syslog and SNMP notifications

Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert
Notifications. Then click Set Up in the Alert Notifications pane on the right.
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide
Note: Although a tab is provided for configuring email notifications, we
recommend that you set up email notifications using Hi-Track Remote
Monitoring system.
Installing your storage system that includes an SVP
Configure syslog and SNMP notifications
DNS Domain Name: IP address of
■
the DNS server that will perform
address resolution.
DNS Search Order: Search domain
■
names. Use the Up and Down
buttons to order the domain names.
Maintenance Port: Do not change
■
these values.
Internal Network: Do not change
■
this value.
21