Hitachi VSP G200 System Administration Manual page 188

Attribute
auth.server.name
auth.group.mapping
auth.ldap.<server_na
me>.protocol
auth.ldap.<server_na
me>.host
auth.ldap.<server_na
me>.port
auth.ldap.<server_na
me>.timeout
auth.ldap.<server_na
me>.attr
188
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Description
The name of an authentication
server.
When registering a primary and a
secondary server, use a comma to
separate the names. The name of
the server, including the primary
name, secondary name, and the
comma (1 byte) must be 64 bytes
or less.
The names can use all ASCII code
characters except for the following:
\ / : , ; * ? " < > | $ % & ' ˜
In this manual, the value specified
here is called <server_ name>
hereafter.
Information about whether to work
together with an authorization
server:
• true: Works together
• false: Does not work together
LDAP protocol to use.
• ldaps: Uses LDAP over SSL/TLS.
• starttls: Uses StartTLS.
When you specify "true" to
auth.ldap.<server_name>.dns_look
up, specify ldaps.
A host name, an IPv4 address or an
IPv6 address of the LDAP server. An
IPv6 address must be enclosed in
square brackets. To use StartTLS as
a protocol, specify a host name.
If this value is specified,
auth.ldap.<server_name>.dns_look
up will be ignored
A port number of the LDAP server.
Must be between 1 and 65,535.
The number of seconds before the
connection to the LDAP server
times out. It must be between 1
2
and 30.
Attribute name to identify a user
(such as a user ID).
• Hierarchical model: An attribute
name where the value that can
identify a user is stored
User administration
Required /
Optional
Required
Optional
Rquired
1
Optional
Optional
2
Required
Required
Default value
None
False
None
None
389
10
None