Configure Syslog And Snmp Notifications - Hitachi Virtual Storage Platform E990 Installation Manual

14. When prompted that initial settings are complete, click Close.
Next steps
(Optional) Configure syslog and SNMP notifications.

Configure syslog and SNMP notifications

Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert Notifications. Then click Set Up in
the Alert Notifications pane on the right.
NoteAlthough a tab is provided for configuring email notifications, we recommend that you set up email
notifications using Hitachi Remote Ops monitoring system.
2. To configure the storage system to send notifications in syslog format, complete the settings in the Syslog tab.
Then open a firewall port on your network for transferring syslogs.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-05-0x/Installation/Installing_your_VSP_E990_st...
Updated: Thu, 15 Feb 2024 22:27:14 GMT
Powered by
19