Microversion.csv - Hitachi VSP G200 System Administration Manual

Item
Connection
Channel Speed
WWN
CHB Location
Package Type
T10 PI Mode

MicroVersion.csv

This CSV file contains information about software versions.
Item
DKCMAIN
ROM BOOT
RAM BOOT
Config
HDD
338
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
• Blank if "Package Type" is iSCSI or NAS module
One of the Fibre topology settings:
• Point to Point
• FC-AL
• Blank if "Package Type" is iSCSI or NAS module
Channel Speed of this port
• 1 Gbps
• 2 Gbps
• 4 Gbps
• 8 Gbps
• 10 Gbps
• 16 Gbps
• 32 Gbps
• Auto
• Blank if "Package Type" is NAS module
WWN of this port (hexadecimal number)
Blank if "Package Type" is iSCSI or NAS module
CHB on which the port is installed. CHB-1A/1B/1C/1D or CHB-2A/2B/2C/2D if
"Package Type" is NAS module.
CHB type for CHB Location
• Fibre:
○
8FC4 (CHB)
○
16FC2 (CHB)
○ 32FC4R (CHB)
• iSCSI:
○
10iSCSI2o (CHB)
○
10iSCSI2c (CHB)
• NAS module:
○
NAS Module (CHB)
Indicates whether the T10 PI mode can be applied to the port.
• Enabled
• Disabled
• Blank if "Package Type" is not 16FC2 (CHB) or 32FC4R (CHB)
Table 45 MicroVersion.csv file (Title: <<Software Version>>)
The version of the firmware for the RAID storage system (10 digits)
ROM BOOT firmware version (6 digits)
RAM BOOT firmware version (6 digits)
Config version (8 digits)
HDD firmware version (4 digits)
HDD version in the format "(HDD-device-type - code):(version)".
Examples of storage configuration reports
Content
Content