Hitachi VSP G200 System Administration Manual page 236

3.
4.
236
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Field/Item
OK
cancel
There are two ways to add groups:
• Enter the full Distinguished Name for the group (for example
"CN=Mygroup, CN=users, DC=example, DC=com") and click the add
button.
• Click the find group button.
○ Groups that exist under this Base DN are displayed in a dialog
window. The list can be filtered by entering a partial group name. A
maximum of 1000 group names is displayed. Select a group from
the list. Only one group can be added at a time.
○ Click add to add the group's distinguished name to this page.
○ Click close to return to the Active Directory Groups page without
selecting a group from the list.
Select a User Level to be assigned to members of the group.
CLI access is given to members of all groups defined with the Global
level.
Setting up security
Description
and data. Users in a read-only group have permission to view
most pages of the NAS Manager; however, they are not allowed
to perform any actions that would trigger a system or
configuration change. The Active Directory Group Details page
will not allow the read-only attribute to be modified. The group
would need to be deleted and re-added to change this attribute.
Note:
Users in a group with the read-only attribute
can not access the CLI, and a user with CLI access may
not be read-only. For complete details on read-only
access, please see the section, Read-only users, in the
NAS Storage System User Administration Guide.
Click to save the group details. The SMU checks that the group
exists in Active Directory. If the group does not exist (or if the
SMU failed to access any AD server) the user is asked for
confirmation that they still wish to save it. After saving the
group, the updated group list page is displayed.
Cancels input.