Sysoptinfo.csv - Hitachi VSP G200 System Administration Manual

Item
DEV# Start
DEV# End
SSID

SysoptInfo.csv

This CSV file contains information about system options.
Item
Spare Disk Recover
Dynamic Sparing
Correction Copy
Disk Copy pace
System Option On
Link Failure Threshold
WwnInfo.csv
This CSV file contains information about hosts. A record is created for each
host.
For details about the host setting, see the Provisioning Guide.
Table 61 WwnInfo.csv file (Title: <<World Wide Name Information>>)
Item
Port
Host Group
348
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Table 59 SsidInfo.csv file (Title: <<Subsystem ID >>)
First LDEV number for the SSID
Last LDEV number for the SSID
Subsystem ID (hexadecimal)
Table 60 Sysoptinfo.csv file (Title: <<System Option Information>>)
Speed of copying data to the spare drive.
• Interleave mode
• Full Speed mode
Information about whether to perform automatic copy to a spare drive if the
occurrences of drive failures exceed the threshold.
• On
• Off
Information about whether to perform correction copy to a spare drive if a drive is
blocked.
• On
• Off
Speed of copying the spare drive in the Interleave mode.
• Faster
• Medium
• Slower
System options that are set to ON.
Output example: modeXXXX (0 to 2047, decimal number)
Threshold to notify the link failure (0 to 255, decimal)
Port name.
Host group name
iSCSI target alias is output if the "Package Type" is iSCSI.
Examples of storage configuration reports
Content
Content
Content