Logical Devices Report - Hitachi VSP G200 System Administration Manual

Item
Host Group Name / iSCSI
Target Alias
iSCSI Target Name
Host Mode
Host Mode Option
Host Name
HBA WWN / iSCSI Name

Logical Devices report

The following figure shows an example of a logical volumes report. The table
following the figure describes the items in the report.
Item
LDEV ID
LDEV Name
Capacity (MB)
Emulation Type
Resource Group Name
Resource Group ID
PG
RAID Level
Drive Type/RPM
286
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Name of the host group / alias of the iSCSI target
Name of the iSCSI target
Host mode of the host group
Host group host mode option. When more than one host mode option is specified,
they are separated by semicolons (;)
Name of the host that can access the LU path through the port
Host WWN / host iSCSI name. The name is in 16-digit hex format.
The logical volume number
The logical volume name
Capacity of the logical volume
Emulation type of the logical volume
Resource group name where LDEV belongs
Resource group ID where LDEV belongs
The parity group number.
• If the number starts with "E" (for example, E1-1), the parity group contains
external volumes.
• If the number starts with "M" (for example, M1-1), the parity group contains
FICON DM volumes.
A hyphen displays for Dynamic Provisioning or Thin Image V-VOLs.
RAID level of the parity group where the logical volume belongs
Drive type and round-per-minute (RPM) of the drive of the parity group where the
logical volume belongs.
Examples of storage configuration reports
Description
Description
1