Configure Syslog And Snmp Notifications - Hitachi VSP G130 Installing Instructions

14. When prompted that initial settings are complete, click Close.
Next steps
(Optional) Configure syslog and SNMP notifications.
Parent Topic
• Step 6: Perform the initial setup
Initial setup of the storage system is performed using the Windows-based management console.

Configure syslog and SNMP notifications

Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert Notifications. Then click Set Up in
the Alert Notifications pane on the right.
NoteAlthough a tab is provided for configuring email notifications, we recommend that you set up email
notifications using Hi-Track Remote Monitoring system.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0...
Updated: Mon, 01 Feb 2021 07:07:26 GMT
Powered by
21