Hitachi VSP G200 System Administration Manual page 287

Item
Drive Type-Code
Drive Capacity
PG Members
Allocated
SSID
CVS
OCS
Attribute
Provisioning Type
Pool Name
Pool ID
Current MPU
Setting MPU
Command Device: Security
Command Device:
User Authentication
Command Device:
Device Group Definition
Encryption
T10 PI
ALUA Mode
Notes:
1. A hyphen (-) displays if the LDEV is an external volume.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
A hyphen (-) is displayed as RPM when the drive is SSD.
Type code of the drive of the parity group where the logical volume belongs
Capacity of the drive of the parity group where the logical volume belongs.
List of the drive locations of the parity group where the logical volume belongs
Information about whether the host can access the logical volume.
For mainframe volumes and multi-platform volumes, "Y" is displayed unless the
volumes are in the reserved status.
SSID of the logical volume
Information about whether the logical volume is a customized volume
Oracle checksum
The attribute of the logical volume
Provisioning type of the logical volume
• For V-VOLs of Dynamic Provisioning, the name of the pool related to the logical
1
volume is displayed
• If the logical volume attribute is Pool, the name of the pool where the logical
volume belongs is displayed
• When neither of the above are displayed, the pool name is blank
The ID of the pool indicated by "Pool Name" A hyphen (-) displays for volumes other
than pool-VOLs or V-VOLs
The number of the MP unit that currently controls the logical volume
The number of the MP unit that you specified to control the logical volume
Indicates whether Security is specified as the attribute for the command device. A
hyphen (-) displays when "Attribute" is not "CMDDEV".
Indicates whether User Authentication is specified as the attribute for the command
device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Indicates whether Device Group Definition is specified as the attribute for the
command device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Indicates whether the parity group to which the LDEV belongs is encrypted.
• For internal volumes: Enabled (encrypted) or Disabled (not encrypted)
• For external volumes: blank
Indicates the T10 PI attribute set for the LDEV.
• Enabled
• Disabled
• Blank if the emulation type is not OPEN-V
Indicates whether the ALUA mode is enabled:
• Enabled: ALUA mode is enabled.
• Disabled: ALUA mode is disabled.
Examples of storage configuration reports
Description
1
1
1
1
287