Viewing The Windows Event Log - Hitachi VSP G200 System Administration Manual

3. Execute the following batch file:
eventlog.bat action monitoring-period
• action: Specify one of the following:
• monitoring-period: If you specified 1 for action, specify the monitoring
• A space is required between eventlog.bat and action.
• A space is required between action and monitoring-period.
• The command prompt is displayed if the command finishes without
4. Close the command prompt.

Viewing the Windows event log

You can view the Windows event log which is output to the SVP.
Procedure
1. From the Windows start menu, click Control Panel > System and
Security > Administrative Tools > Event Viewer.
2. Click Windows Logs > Application in the left pane.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
VSP G200: 2000
VSP G400 or VSP F400, VSP G600 or VSP F600: 4000
VSP G800 or VSP F800: 6000
For example, for a VSP G600 that has the serial number 400102, the
value is 834000400102.
0: Stop outputting failure information
1: Start outputting failure information
when this parameter is omitted, 0 is set.
period, from 5 to 720 minutes.
any errors.
Alert notifications 253