Hitachi VSP G200 System Administration Manual page 175

• To add or delete DP pool volumes, you must first add or delete DP pools.
Before you begin
You must have Security Administrator (View & Modify) role to perform this
task.
Procedure
1. In the Explorer pane, click the Administration tab, and then select
Resource Groups.
2. Select the desired resource group (check the box next to the name of the
resource group) to display the resource information for the resource
group.
• To change the name of the selected resource group, click Edit
Resource Group, and enter the new name.
• To add resources to the selected resource group, select the Parity
Groups, LDEVs, Ports, or Host Groups / iSCSI Targets tab, click
Add Resources, and follow the instructions on the Add Resources
window.
• To remove resources from the selected resource group, select the
Parity Groups, LDEVs, Ports, or Host Groups / iSCSI Targets
tab, select the resources to be removed, and then click Remove
Resources.
3. Enter a task name or accept the default, and then click Submit.
If you select View task status, the Tasks & Alerts tab opens.
Deleting resource groups
You can delete a resource group only when the resource group does not
contain any resources and is not assigned to any user groups.
The following resource groups cannot be deleted:
• meta_resource, NAS_Platform_System_RSG
• A resource group that is assigned to a user group
• A resource group that has resources assigned to it
• Resource groups included in different resource groups cannot be removed
at the same time.
Before you begin
The Security Administrator (View & Modify) role is required to perform this
task.
Procedure
1. In the Explorer pane, expand the Storage Systems tree, click the
Administration tab, select Resource Groups.
2. Click the check box of a Resource Group Name.
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
User administration 175