Parity Groups Report - Hitachi VSP G200 System Administration Manual

Item
MP Unit ID
Auto Assignment
Resource ID
Resource Name
Type

Parity Groups report

The following figure shows an example of a parity groups report. The table
following the figure describes the items in the report.
Item
PG
DKB
RAID Level
Resource Group Name
Resource Group ID
Emulation Type
Number of LDEVs (Total)
Number of LDEVs
(Unallocated)
Total LDEV Capacity (MB)
Unallocated LDEV Capacity
(MB)
290
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
MP unit ID
Auto assignment attribute for the MP unit
ID of this resource that the MP unit controls
The name of the resource that the MP unit controls. If "Type" is LDEV, the LDEV name
that is set is displayed. A hyphen (-) displays for journal volumes or external volumes.
The type of the resource that the MP unit controls
Parity group number
• If the number starts with "E" (for example, E1-1), the parity group contains
external volumes (Hitachi Universal Volume Manager User Guide).
• If the number starts with "M" (for example, M1-1), the parity group contains
volumes for FICON DM.
Name of the disk board that controls the parity group
RAID level of the parity group
Name of the resource group in which the parity group belongs
ID for the resource group in which the parity group belongs
Emulation type of the parity group
The number of the logical volumes in the parity group
The number of the logical volumes in the parity group that the host cannot access
Capacity of the logical volumes in the parity group
Capacity of the logical volumes in the parity group that the host cannot access
Examples of storage configuration reports
Description
Description
1
1