Effects Of Changing Svp Port Numbers - Hitachi VSP G200 System Administration Manual

If you omitted the serial number, information of every storage system
that is registered in the Storage Device List window is displayed.
For the port on which the port number information is not allocated, Not
Defined is displayed and a completion message displays.
3. Press any key to acknowledge the message and close the message box.
4. Close the Windows command prompt.

Effects of changing SVP port numbers

Set the firewall settings of the management client according to new SVP port
numbers.
The following table describes the effects for each port number.
Port number key name
MAPPWebServer
MAPPWebServerHttps
RMIClassLoader
RMIClassLoaderHttps
RMIIFRegist
PreRMIServer
DKCManPrivate
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Effects
Changes the method to specify
URL for Device Manager -
Storage Navigator login
In Hitachi Command Suite:
You must change the HCS port
number to be the same number.
When you execute the Export
Tool command, you must
specify a port number. The port
number should be the one you
have specified for the -el.dlport
operand of the java command,
which was used for downloading
the Export Tool.
Report configuration tool
(raidinf commands)
When you login to Device
Manager - Storage Navigator by
using raidinf command, you
must specify the IP address and
new port number of the SVP.
When you execute the Export
Tool command, you must
specify the IP address and new
port number of the SVP for IP-
sub-command.
In Hitachi Command Suite:
You must change the HCS port
number to the same number.
None
None
Configuring the storage system
User reference guide on
changing the SVP port number
See Logging in to Device
Manager - Storage Navigator on
page 47.
Hitachi Command Suite
Installation and Configuration
Guide
Performance Guide
See .
Performance Guide
(Performance Monitor, Server
Priority Manager)
Hitachi Command Suite
Installation and Configuration
Guide
None
None
129