Hitachi VSP G200 System Administration Manual page 191

The attributes are defined in the following tables.
Table 7 RADIUS definition (for authentication server)
Attribute
auth.server.type
auth.server.name
auth.group.mapping
auth.radius.server-
name.protocol
auth.radius.server-
name.host
auth.radius.server-
name.port
auth.radius.server-
name.timeout
auth.radius.server-
name.secret
auth.radius.server-
name.retry.times
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
Description
Type of an authentication server. Specify
radius.
The name of an authentication server.
When registering a primary and
secondary server, use a comma to
separate the names. The name of the
server, including the primary name,
secondary name, and the comma (1
byte) must be 64 bytes or less.
The names can use all ASCII code
characters except for the following:
\ / : , ; * ? " < > | $ % & ' ˜
In this manual, the value specified here is
called server-name hereafter.
Information about whether to work
together with an authorization server
• true: Works together
• false: Does not work together
RADIUS protocol to use.
• PAP: Password authentication protocol
that transmits plaintext user ID and
password
• CHAP: Challenge-handshake
authentication protocol that transmits
encrypted password
A host name, an IPv4 address or an IPv6
address of the RADIUS server. An IPv6
address must be enclosed in square
brackets.
A port number of the RADIUS server.
Must be between 1 and 65,535.
The number of seconds before the
connection to the RADIUS server times
out.
Must be between 1 and 30.
RADIUS secret key used for PAP or CHAP
authentication
Retry times when the connection to the
RADIUS server fails.
Must be between 0 and 3. 0 means no
1
retry.
User administration
Required /
Optional
Required
Required
Optional
Required
Required
Optional
1
Optional
2
Required
Optional
Default
value
None
None
False
None
None
1,812
10
None
3
191