General Safety Instructions - Hirschmann RS20 User Manual

General Safety Instructions

U
This device is electrically operated. Adhere strictly to the safety require-
ments relating to voltages applied to the device as described in the ope-
rating instructions!
Failure to observe the information given in the warnings could result in
serious injury and/or major damage.
V Only personnel that have received appropriate training should operate
this device or work in its immediate vicinity. The personnel must be ful-
ly familiar with all of the warnings and maintenance measures in these
operating instructions.
V Correct transport, storage, and assembly as well as careful operation
and maintenance are essential in ensuring safe and reliable operation
of this device.
V Only use undamaged parts!
V These products are only to be used in the manner indicated in this ver-
sion of the manual.
V Any work that may have to be performed on the electrical installation
should be performed by fully qualified technicians only.
Warning! (OCTOPUS 16M-2FX, OCTOPUS 16M-8PoE-2FX,
OCTOPUS 24M-2FX)
LED- or LASER components according to IEC 60825-1 (2001):
CLASS 1 LASER PRODUCT.
LIGHT EMITTING DIODE - CLASS 1 LED PRODUCT.
National and international safety regulations
U
V Make sure that the electrical installation meets local or nationally ap-
plicable safety regulations.
Note on the CE marking
U
The devices comply with the regulations contained in the following Euro-
pean directives:
2004/108/EG
Directive of the European Parliament and of the Council on the approxi-
mation of the laws of the member states relating to electromagnetic
compatibility.
72/245/EEC, 2006/28/EG
Radio interference (electromagnetic compatibility) in vehicles
Certified devices are marked with an e1 type approval number.
In accordance with the above-named EU directives, the EU conformity
declaration will be at the disposal of the relevant authorities at the follo-
wing address:
6
OCTOPUS 8M/16M/24M
Release 07/2008