Hirschmann RS20 User Manual page 257

Housing
U
Only technicians authorized by Hirschmann are permitted to open the
housing.
The device is grounded via the separated ground screw. It is located on
the left under the front panel.
V Make sure that the electrical installation meets local or nationally ap-
plicable safety regulations.
Environment
U
The device may only be operated in the listed maximum surrounding air
temperature range at the listed relative air humidity range (non-conden-
sing).
V The installation location is to be selected so as to ensure compliance
with the climatic limits listed in the Technical Data.
Make sure that there is no heat conduction from the surroundings to
the device. It is possible to mount the device on a temperature insula-
ting material.
V To be used in a Pollution Degree listed in the Technical Data.
Accessories
U
z
Warning!
HOT SURFACE -
RISK OF BURNS!
Please note that some characteristics of the recommended accessory
parts may differ from the appropriate product. This might limit the
possible operating conditions for the entire system.
Qualification requirements for personnel
U
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and ope-
ration of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:
D
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
D
trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
D
trained in providing first aid.
OCTOPUS 8M/16M/24M
Release 07/2008
5