Hirschmann RS20 User Manual page 151

Network Load Control
exit
show classofservice trust
1/1
Class of Service Trust Mode: Untrusted
Untrusted Traffic Class: 4
Assigning the traffic class to a DSCP
Select the
QOS/Priority:IP DSCP Mapping dialog.
In the "Traffic Class" column, enter the desired values.
enable
configure
classofservice ip-dscp-
mapping cs1 1
show classofservice ip-dscp-mapping
IP DSCP
-------------
0(be/cs0)
1
.
.
8(cs1)
.
Always assign the DSCP priority to received IP data
packets per interface (PowerMICE, MACH 104, MACH 1040
and MACH 4000)
enable
configure
interface 6/1
classofservice trust ip-
dscp
exit
exit
show classofservice trust
6/1
Basic Configuration
Release 6.0 07/2010
Switch to the privileged EXEC mode.
Display the trust mode on interface 1/1.
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Assign traffic class 1 to DSCP CS1.
Traffic Class
-------------
2
2
1
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Switch to the interface configuration mode of
interface 6/1. Assign the "trust ip-dscp" mode to the
interface.
Switch to the Configuration mode.
Switch to the privileged EXEC mode.
Display the trust mode on interface 6/1.
8.4 QoS/Priority
151