Hirschmann RS20 User Manual page 152

Network Load Control
Class of Service Trust Mode: IP DSCP
Non-IP Traffic Class: 2
Always assign the DSCP priority to received IP data
packets globally
Select the QoS/Priority:Global dialog.
Select trustIPDSCP in the "Trust Mode" line.
enable
configure
classofservice trust ip-
dscp
exit
exit
show classofservice trust
Class of Service Trust Mode: IP DSCP
Configuring Layer 2 management priority
Configure the VLAN ports to which the device sends management
packets as a member of the VLAN that sends data packets with a tag
(see on page 158 "Examples of
Select the QoS/Priority:Global dialog.
In the line VLAN priority for management packets you enter
the value of the VLAN priority.
enable
network priority dot1p-vlan
7
exit
show network
152
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Assign the "trust ip-dscp" mode globally.
Switch to the Configuration mode.
Switch to the privileged EXEC mode.
Display the trust mode.
VLANs").
Switch to the Privileged EXEC mode.
Assign the value 7 to the management priority so
that management packets with the highest priority
are sent.
Switch to the privileged EXEC mode.
Displays the management VLAN priority.
8.4 QoS/Priority
Basic Configuration
Release 6.0 07/2010