Hirschmann RS20 User Manual page 99

Synchronizing the System Time in the
Network
With "Set time from PC", the device takes the PC time as the system
time and calculates the IEEE 1588 / SNTP time using the local time
difference.
"IEEE 1588 / SNTP time" = "System time" - "Local offset"
The "Local Offset" is for displaying/entering the time difference
between the local time and the "IEEE 1588 / SNTP time".
With "Set offset from PC", the agent determines the time zone on
your PC and uses it to calculate the local time difference.
enable
configure
sntp time <YYYY-MM-DD
HH:MM:SS>
sntp client offset <-1000 to
1000>
Basic Configuration
Release 6.0 07/2010
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Set the system time of the device.
Enter the time difference between the local time
and the "IEEE 1588 / SNTP time".
7.1 Entering the Time
99