General Safety Instructions - Hirschmann RS20 User Manual

Hide thumbs Also See for RS20:
Table of Contents

Advertisement

Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and oper-
ation of this product and are appropriately qualified for their job. This in-
cludes, for example, those persons who have been:
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
trained in providing first aid.

General safety instructions

Electricity is used to operate this equipment. Comply in every detail with
the safety requirements specified in the operating instructions regarding
the voltages to apply.
Non-observance of these safety instructions can therefore cause material
damage and/or serious injuries.
Only appropriately qualified personnel should work on this device or in
its vicinity. These personnel must be thoroughly familiar with all the
warnings and maintenance procedures in accordance with this oper-
ating manual.
The proper and safe operation of this device depends on proper han-
dling during transport, proper storage and assembly, and conscien-
tious operation and maintenance procedures.
Never start operation with damaged components.
Only use the devices in accordance with this manual. In particular, ob-
serve all warnings and safety-related information.
Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.
Please note that products recommended as accessories may have
characteristics that do not fully correspond to those of the correspond-
ing product. This may limit their possible usage in the overall system.
Note:
LED or LASER components in compliance with IEC 60825-1 (2001):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
MACH 100
Release
07/09
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents