Port Status; Carrying Out Basic Settings - Hirschmann RS20 User Manual

Port status

U
A green/yellow LEDs on the specific ports display port-related informa-
tion.
LS/DA (Link status/Data, green/
yellow LED),
not lit
lit green
flashes green (1 time per second)
flashes green (3 times per second) port is disabled
flashes yellow
Hinweis: The port status for activated Power over Ethernet can be
requested via the software management.
2.3

Carrying out basic settings

IP addresses must be entered when the device is installed for the first time.
The device provides 6 options for configuring the IP addresses:
D
Entry via the V.24 connection.
D
Entry by HiDiscovery protocol
D
Configuration via BOOTP
D
Configuration via DHCP
D
Configuration via DHCP Option 82
D
The AutoConfiguration Adapter
State of delivery
U
D
IP address: The device looks for the IP address using DHCP
D
Password for management:
user, password: public (read only)
admin, password: private (read and write)
D
V.24 data rate: 9.600 baud
D
Ring redundancy: on
Ring ports on 100 Mbit/s full duplex
D
Optical 100 Mbit/s ports: 100 Mbit/s full duplex
All other ports: autonegotiation
D
Ethernet ports: Link status is not evaluated (signal contact)
D
Redundancy manager switched off
OCTOPUS 8M/16M/24M
Release 07/2008
Meaning
no data reception at the specific port, no connection
valid connection
port is switched to stand-by
data reception at the specific port
23