Snmp Traps During Boot - Hirschmann RS20 User Manual

Operation Diagnosis
Trap name
hmAddressRelearnDetectT
rap
hmDuplexMismatchTrap
Table 22: Possible traps
9.1.2

SNMP Traps during Boot

The device sends the ColdStart trap every time it boots.
178
Meaning
is sent when Address Relearn Detection is activated and the
threshold for the MAC addresses relearned at different ports has
been exceeded. This process very probably indicates a loop
situation in the network.
is sent if the device has detected a potential problem with the
duplex mode of a port.
9.1 Sending Traps
Basic Configuration
Release 6.0 07/2010