Hirschmann RS20 User Manual page 35

Entering the IP Parameters
enable
network protocol none
network parms 10.0.1.23
255.255.255.0
copy system:running-config
nvram:startup-config
After entering the IP parameters, you can easily configure the device via the
Web-based interface (see the "Web-based Interface" reference manual).
Basic Configuration
Release 6.0 07/2010
2.2 Entering IP parameters via CLI
Switch to the Privileged EXEC mode.
Deactivate DHCP.
Assign the device the IP address 10.0.1.23 and
the netmask 255.255.255.0. You have the option
of also assigning a gateway address.
Save the current configuration to the non-volatile
memory.
35