Hirschmann RS20 User Manual page 104

Synchronizing the System Time in the
Network
Configuration SNTP Server
In "Server status" you switch the SNTP server of the device on/
off.
In "Anycast destination address" you enter the IP address to
which the SNTP server of the device sends its SNTP packets
(see table
In "VLAN ID" you specify the VLAN to which the device
periodically sends its SNTP packets.
In "Anycast send interval" you specify the interval at which the
device sends SNTP packets (valid entries: 1 s to 3,600 s, on
delivery: 120 s).
With "Disable Server at local time source" the device disables the
SNTP server function if the source of the time is local (see
Time dialog).
IP destination address
0.0.0.0
Unicast address (0.0.0.1 - 223.255.255.254)
Multicast address (224.0.0.0 - 239.255.255.254),
especially 224.0.1.1 (NTP address)
255.255.255.255
Table 5: Destination address classes for SNTP packets
104
5).
Send SNTP packet to
Nobody
Unicast address
Multicast address
Broadcast address
7.2 SNTP
Basic Configuration
Release 6.0 07/2010