Changing The Facility Code; Setting The Backlight - Rosslare AYC-H6355 Installation And User Manual

Reader Functionality
You hear three beeps.
The system returns to Transmit
mode.
• The Programming code cannot be erased, meaning the code 0000
is invalid and does not erase the Programming code.
• The factory default 4-digit Programming code is 1234.
7.2.6

Changing the Facility Code

1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The Transmit LED turns red.
3. Enter the new 3-digit code you
wish to set as the Facility code.
You hear three beeps.
The system returns to Transmit
mode.
• The Facility code can be in the range of 000 to 255.
• The default Facility code is 0.
7.3

Setting the Backlight

1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The Transmit LED turns red.
30
Mode/Transmit
Mode/Transmit
Mode/Transmit
Mode/Transmit
Mode/Transmit
Mode/Transmit
AYC-x6355 Installation and User Manual
Door/Program
Red
Door/Program
Green
Door/Program
Red Green
Door/Program
Red
Door/Program
Green
Door/Program
Red Green