Pin Code Length/Factory Default Settings - Rosslare AYC-H6355 Installation And User Manual

Controller Functionality
The Mode LED turns green and
the Door LED turns orange.
3. Enter 000 for user slot access.
The Door LED flashes orange.
The controller is now waiting for the primary code of the user.
4. Enter the primary code belonging to the user
The Mode LED flashes green.
5. Enter the assignment digit for the current user slot:
1 activates the Lock Strike relay only default

2 activates the Auxiliary relay only

3 activates the Lock Strike and Auxiliary relays

If the assignment digit is valid, three beeps are heard and the
controller returns to Normal mode.
If the assignment digit is invalid, a long beep sounds and the
controller waits for another assignment digit to be entered.
8.9.18

PIN Code Length/Factory Default Settings

You must be very careful before using this command! Changing
the PIN code length also erases the entire memory contents,
including all user and special codes, and return all codes to
their factory default settings.
AYC-x6355 Installation and User Manual
Mode/Transmit
Green
Mode/Transmit
Green Orange
Mode/Transmit
Green Orange
Door/Program
Orange
Door/Program
Door/Program
59