Selection From The Multichannel Controller Module - JUMO mTRON T Operating Manual

9.1

Selection from the multichannel controller module

Overview
(1) Exit function
(3) View list
Exit function
Touch the screen here to exit the function and return to the visualization from which it was
called up.
Module selection
Touch the screen here to expand or collapse the corresponding branch of a module in the tree.
List type
Touch the screen here to expand or collapse the corresponding branch in the tree.
View list
Touch the screen here to display the corresponding list.
In the lists, in addition to the distinction between alarm and event, there is a further distinction
between two types:
• Display of all alarms and/or events (independent of the batch to which these relate)
• Display of alarms and/or events that relate to a specific batch
NOTE!
The number of batch-related lists depends on the quantity of the active batch.
 Setup program:
HMI > C
(1)
(2)
(4)
(2)
ONFIGURATION LEVEL
9 Alarm and event lists
(2) Module selection
(4) View list
> B /P
ATCHES LANTS
(1)
(3)
(3)
91