Connection Diagram; Connection Elements - JUMO mTRON T Operating Manual

4.3

Connection diagram

CAUTION!
At maximum load, the temperature at the "+24 V" and "GND" terminals (Voltage supply In)
may exceed 60 °C.
As a result the insulation of the cable may be damaged.
The cable must be heat resistant up to at least 80 °C.
4.3.1

Connection elements

(1) USB device interface (setup)
(3) USB host interface 2
(5) System bus Out
(7) Com1 interface
(9) Com2 interface
(11) Voltage supply In, DC 24 V
CAUTION!
Functional grounding:
Connection terminal for functional ground.
To meet the specified EMC characteristics, this terminal must be connected to functional
ground.
(1) (2) (3) (4)
4 Electrical connection
(5) (6) (7)(8)
(2) USB host interface 1
(4) System bus In
(6) LAN interface
(8) Com1 terminating resistor
(10) Com2 terminating resistor
(12) Functional grounding
(11)
(9)(10)
(12)
39