Alarm - JUMO mTRON T Operating Manual

13 Configuration
13.5.1

Alarm

Limit value monitoring with one or two alarms can be activated for each analog input. The alarm
is entered in the status and title line and in the alarm and event list of the multifunction panel.
This type of limit value monitoring is in addition to and independent of the limit value monitoring
of the base unit.
Setup dialog
Parameter
Parameter
Alarm type 1, 2
?
Limit value 1, 2
Alarm text 1, 2
Switching differ-
ential
?
Alarm rejection
Alarm delay
138
Selection/settings
Inactive
Min. Alarm
Max. Alarm
-99999 to 0 to +99999
Use default text or enter other text.
0 to 99999
Inactive
Digital selector
0 s to 65535 s
Description
Monitoring is not active.
Alarm is issued if the limit value is not
met.
Alarm is issued if the limit value is
exceeded.
Limit value at which an alarm is issued.
Text that is displayed or entered in the
status and title line and in the alarm list
and event list in the case of an alarm.
Used to reject constant switching opera-
tions in the event of minor fluctuations of
the input signal around the limit value
Signal for activating the alarm rejection
Delay time for alarm triggering