Cpu; Controller; Hmi; Date And Time - JUMO mTRON T Operating Manual

12 Parameterization
NOTE!
The base unit (central processing unit or CPU) and multifunction panel (HMI) can only appear
once. The controller module can appear multiple times.
12.1

CPU

The user can edit a maximum of 50 (system version 02: 200) PLC parameters. A prerequisite
for this is that the user has activated the PLC parameters using the setup program.
The PLC parameters are available for free use within user-specific PLC software.
 Setup program:
CPU > P
12.2

Controller...

The user can edit both parameter blocks for each controller channel.
 Setup program:
C
ONTROLLER
12.3

HMI

The user can edit the following parameters:
12.3.1

Date and Time

The user can use this function to enter the current date and time of the multifunction panel. It
is only possible to perform correct allocation to the recorded data with the use of an exact date
and an exact time.
 Setup program:
HMI > O
114
> PLC
ARAMETER LEVEL
> P
ARAMETER LEVEL
> D
NLINE PARAMETERS
PARAMETERS
> P
ARAMETER SETS
T
ATE AND IME