1Binary Linking - JUMO mTRON T Operating Manual

13 Configuration
13.13.1 Binary linking
Setup dialog
Parameter
Parameter
Start at text
0 5
2 to 2
Start at text
NOTE!
Batch text used = Start at text + Binary linking
The user can configure the batch texts using the setup program.
 Setup program:
HMI > S
170
Selection/settings
1 to 64
Inactive
Digital selector
> B
ETUP ONLY ATCH TEXT
Description
This parameter acts as a starting point
for binary linking. If binary linking is
active for a batch text, one of the 128
internal batch texts of the device can be
added to a current batch protocol from
the position "Start at text".
Depending on the configuration, the
binary linking can be used to integrate
up to 64 different texts into the batch
report using the digital signals.
There is a total of 128 batch texts that
are available and can be defined in the
setup program. The batch text used is
composed of the "Start at text" parame-
ter and the "Binary linking".