1Nv Connecting List: Analog - JUMO mTRON T Operating Manual

13 Configuration
13.18.1 NV connecting list: Analog
Setup dialog
Parameter
Parameter
Analog input/
Value
Analog input 1
(Example)
194
Selection/settings
Select input to be connected.
This is the previously selected analog input.
Select the module and – in the selector
to the right – the signal that is to be con-
nected to the analog input.
Description
List of analog inputs of the multifunction
panel
If a connection has already been config-
ured, the module and its signal are dis-
played in the "Value" column.
List of modules in the system and the
relevant signals