Enter Comments - JUMO mTRON T Operating Manual

7 Visualization
Home button
This function calls up a defined visualization. The function must be activated and configured
via the setup program.
 Setup program:
HMI > C
7.12

Enter comments

This function can be used to enter a text (max. 31 characters) that is entered following the com-
pletion of the entry in the event list of the multifunction panel and in the batch reports.
In the diagram display, for example, the text entry is marked with a pencil.
(1) Input mask
(3) Function selection
Input mask
Here, the text entered by the user is displayed during the entry phase.
Communication status
 Chapter 5.1.1 "Status line and Title line", page 44
Function selection
The available functions depend on the active visualization. The functions are described in the
respective sections in this chapter.
82
ONFIGURATION LEVEL
(1)
(3)
> S > U
CREEN SER OPERATING LEVEL
(2) Communication status
(2)