Alarm - JUMO mTRON T Operating Manual

13.8.1

Alarm

Monitoring with an event/alarm can be activated for each digital input.
Setup dialog
Parameter
Parameter
Alarm type
Alarm text
Alarm rejection
Alarm delay
Alarm active at
Selection/settings
No alarm type is set by default.
Alarm
Event
Use default text or enter other text.
Inactive
Digital selector
0 s to 65535 s
High (1)
Low (0)
13 Configuration
Description
The "Alarm" setting leads to an alarm
(incl. collective alarm) and to an entry in
the alarm list and the event list.
The "Event" setting leads to an entry in
the event list; the alarm signals are not
set.
Text that is displayed or entered in the
alarm list and event list.
If the alarm type = Alarm, the text is also
displayed in the status and title line.
Signal for activating the alarm rejection
Delay time for alarm triggering
Alarm at high level (1)
Alarm at low level (0)
147