Batch Evaluation: Report - JUMO mTRON T Operating Manual

7 Visualization
7.9.2

Batch evaluation: Report

(1) Specifications for maximum
(3) Specifications for average
(5) Group selection
(7) Group rotation
Group selection
This function is used to directly select and display one of the active groups. Simply touch one
of the group designations displayed after calling up the function.
NOTE!
The function is only available if more than one group is active.
Channel rotation
This function is used to switch between the individual channels of the active group.
Group rotation
In contrast to the "Group selection" function, in which any group can be selected, this function
displays the groups one after the other.
(1) Group number
76
(1)
(2)
(3)
(4)
(1)
(5) (6) (7)
(2) Specifications for minimum
(4) Specifications for batch start and batch end
(6) Channel rotation
(8) End batch evaluation
(8)