Digital Inputs - JUMO mTRON T Operating Manual

13 Configuration
13.8

Digital inputs

The multifunction panel can manage and record 54 digital inputs. The digital inputs relate to
inputs and/or signals that reach the multifunction panel via the system bus.
For example, the digital inputs are pooled into groups together with other digital signals via the
"Groups" configuration and are available for further use via these groups.
Setup dialog
Parameter
Parameter
Digital input x
?
Channel name
Channel descrip-
tion
Alarm
Digital channel x
The user can perform the allocation in this dialog window using the setup program. Further op-
tions can be seen in the following list.
• Setup program: "NV connecting list: Digital" menu
HMI > C
• Multifunction panel: "HMI digital inputs" menu
D
EVICE MANAGER
146
Selection/settings
Inactive
Digital selector
DI x
Digital input x
ONFIGURATION LEVEL
> C
ONFIGURATION
> NV
CONNECTING LIST
> CPU > NV
CONNECTING LIST
Description
No signal allocated.
Signal that is to be allocated to the input.
Name with a maximum length of seven
characters that is used in the visualiza-
tions together with the channel descrip-
tion.

Chapter 7.6 "Digital", page 65
Description with a maximum length of
21 characters that is used in the visual-
izations together with the channel
names.

Chapter 7.6 "Digital", page 65

Chapter 13.8.1 "Alarm", page 147
: D
IGITAL
> HMI
DIGITAL INPUTS