Enabling Of Extra Codes - JUMO mTRON T Operating Manual

15.3

Enabling of extra codes

In this dialog, additional functions of the multifunction panel are released or blocked (e.g. reg-
istration function).
Setup dialog
Parameter
Parameter
Generate code
number
Enter enable
code
Reset extra
codes
Selection/settings
To generate a code number, click the
function to select it and then click the
"Next" button. Further instructions are
then given.
To enter an enable code, click the func-
tion to select it and then click the "Next"
button. Further instructions are then
given.
To reset extra codes click the function to
select it and then click the "Next" button.
Further instructions are then given.
15 Online parameters
Description
This function is used to generate a code
number to enable extra code. The code
number is required to obtain an enable
code from a sales partner.
This function is used to enable extra
code. The enable code received from
the sales partner is required for this pur-
pose.
This function can be used to lock extra
codes that have been enabled.
Locked extra codes can only be acti-
vated by re-enabling. This procedure is
subject to charge!
255