Memory Display (History); Chapter 8 "Memory Display (History) - JUMO mTRON T Operating Manual

The "Memory display" function can be used to display and check data recorded using the mul-
tifunction panel. The size of the memory for the memory display can be configured.
 Setup program:
HMI > C
The memory display can be activated in the "Diagram" and "Digital" visualizations and is also
used to display completed batch reports.
NOTE!
The memory display can only be called up if the parameter HMI > C
G
ROUPS
Selecting the memory display
The memory display is selected via the button shown above.
Example: Calling up the memory display in the "Diagram" visualization
ONFIGURATION LEVEL
> G > S
ROUP X TATUS

8 Memory display (History)

> D > H
EVICE DATA
is set to "Display / Save" in the configuration of the group.
ISTORY MEMORY
ONFIGURATION LEVEL
>
85