Counters/Integrators; Batches/Plants - JUMO mTRON T Operating Manual

12.3.2

Counters/Integrators

The user can use this function to enter the current value for the counters and integrators.
(1) Display of current value
Entry of new value
Touch here to enter the new value of the counter or integrator.
CAUTION!
The new value is adopted by the system when the "OK" button is touched.
The value 0, which is preset by the system when the function is called up, is also adopted
when "OK" is touched. This may not be desired.
If the current value should only be monitored, the user must exit the function by touching the
"Cancel" button.
 Chapter 7.10 "Counters/Integrators", page 78
12.3.3

Batches/Plants

The user can use this function to enter the current batch numbers. The batch numbers can be
displayed in the batch report.
 Chapter 7.8 "Current batch", page 69
(1)
(2)
(2) Entry of new value
12 Parameterization
115