Bar Graph - JUMO mTRON T Operating Manual

7 Visualization
Home button
This function calls up a defined visualization. The function must be activated and configured
via the setup program.
 Setup program:
HMI > C
7.3

Bar graph

In this visualization, the analog channels are displayed numerically and as a bar graph (col-
umns). In addition to the analog channels, the digital channels are displayed at the bottom of
the screen.
(1) Alarm
(3) Limit value 1
(5) Limit value 2
(7) Group rotation
NOTE!
If only the digital channels are to be shown, the "Digital" visualization is recommended.
 Chapter 7.6 "Digital", page 65
Alarm
An alarm (Alarm1 or Alarm2) is marked with an orange or red background and an orange or
red bar. The colors can be configured in the setup program and using the multifunction panel.
Communication status
 Chapter 5.1.1 "Status line and Title line", page 44
58
ONFIGURATION LEVEL
> S > U
CREEN SER OPERATING LEVEL
(6)
(2) Communication status
(4) Alarm
(6) Group selection
(8) Home button
(1)
(2)
(7) (8)
(3)
(4)
(5)