Selectors; Analog Selector; Digital Selector - JUMO mTRON T Operating Manual

13 Configuration
13.2

Selectors

Selectors contain signals that are available for configuration in the multifunctional panel. This
relates to multifunctional panel signals as well as signals originating from other modules (trans-
fer via the system bus).
13.2.1

Analog selector

Multifunction panel signals
The following analog signals of the multifunction panel are directly available for configuring
most functions.
Category
Inactive
Analog inputs
Analog variables
Counter/Integra-
tor
Counter/Integra-
tor closed
NOTE!
If a signal originating from another module is required, this must be selected as an input sig-
nal for an analog input; the analog signal is then used for configuring the function in question.
The following integer signals of the multifunction panel are also directly available for configuring
the counters/integrators.
Category
Inactive
Integer variables
Signals of the modules
All analog signals that are transferred via the system bus are available for configuring the an-
alog inputs of the multifunction panel (even the signals of the multifunction panel itself). The
selector for signal selection is identical to the selector for configuring the NV connections.
 Chapter 13.18.3 "Analog signals (overview)", page 197
13.2.2

Digital selector

Multifunction panel signals
The following digital signals of the multifunction panel are directly available for configuring most
functions.
Category
Inactive
Digital inputs
120
Signal
Analog input 1 to 54
Analog variable 1 to 54
Counter/Integrator 1 to 27
Count./Integrator closed 1 to 27
Signal
Integer variable 1 to 16
Signal
Digital input 1 to 54
Description
No signal selected
Analog input signal
Value of the analog variables
Current value of counter or integrator
Value of counter or integrator in most recently
completed capture period
Description
No signal selected
Value of the integer variables
Description
No signal selected
Signal of digital input