Integer Variables - JUMO mTRON T Operating Manual

13.7

Integer variables

The multifunction panel can manage and record 16 integer variables. The integer variables re-
late to inputs or signals that are received via one of the multifunction panel interfaces (RS232,
RS422/485, setup interface, or Ethernet).
The integer variables can be used in process screens and in the counters/integrators.
Integer variables are always active. If no value has yet been received, the variables contain the
value 0.
Setup dialog
Parameter
Parameter
Channel name
Channel descrip-
tion
Unit
Comma format
Retain
Alarm
Selection/settings
IV x
Integer variable x
%
XXXX.X
Yes, No
13 Configuration
Description
Name with a max. length of seven char-
acters
Description with a max. length of 21
characters
Unit in which the recorded signal is to be
displayed, with a max. length of five
characters. The unit is displayed wher-
ever the measured value is displayed in
numerical form.
The comma format determines the num-
ber of pre-decimal and post-decimal
places for the numerical display of the
measured values. If required, the multi-
function panel automatically switches to
a different format in order to display all
pre-decimal places.
First and foremost, all pre-decimal
places must be displayed.
If "Yes", the current value is saved upon
switch-off (power off) and is available
again upon switch-on (power on).
The user can configure up to two alarms
for monitoring two limit values.

Chapter 13.7.1 "Alarm", page 144
143