User Operating Level - JUMO mTRON T Operating Manual

Parameter
Show count./inte-
ger
Show alarms
Lock touchscreen Locks the touchscreen such that it cannot be operated. This does not relate to a
Simulation inputs
NOTE!
The inputs and outputs adopt an undefined status. This parameter should only be activated
for test purposes and also only if no digital outputs are connected.
13.4.4

User operating level

Setup dialog
Selection/settings
Yes ( ), No ( )
Yes ( ), No ( )
switch-off.
Inactive
Digital selector
13 Configuration
Description
"Yes" releases the "Counters/Integra-
tors" visualization for selection by the
user.

Chapter 7.10 "Counters/Integrators",
page 78
"No" rejects the display of fault and
alarm messages in the status and title
line.

Chapter 5.1.1 "Status line and Title
line", page 44
Not locked
Signal (high active) with which the
touchscreen (screen) is locked for as
long as the signal is active.
131